Installing Smart Wall Switch

  1. Install the wall switch. Turn off the power at the circuit breaker for the switch you are replacing. Open the front panel of Smart iBlue Wall Switch, connect wires to the switch (refer to the label on the switch).
  2. *Optional* If light blinks automatically with gleam, please parallel connect the attached capacitor to the middle of L and N, as shown in the picture above. (refer to the picture).
  3. Push all the wires back into the wall box as deep as possible. Screw in the Smart iBlue Wall Switch. Turn on the power at the circuit breaker and turn on the switch. The small LED light near the button will flash blue steadily, waiting to be associated with your device.
  4. The small LED light near the button will blink blue rapidly when associating. The light becomes solid blue when the device associated successfully. The notice would be popped out to indicate that the association process is finished.